The 3rd International Conference on Mechanical Engineering and Intelligent Manufacturing 2022  (MEIM 2022) 

Website URL: www.icmeim.net

Start Date / End Date:  June 10th-12th, 2022

Location: Nanchang, China

Submission Deadline: second round: May 1st

1. About the conference:

2022 The 3rd International Conference on Mechanical Engineering and Intelligent Manufacturing (MEIM 2022)  is scheduled to be held in Nanchang, China from June 10th to 12th, 2022. This conference will focus on research areas such as mechanical engineering and intelligent manufacturing. The aim of the discussion is to provide a platform for experts, scholars, engineering and technical personnel, and technical research and development personnel engaged in mechanical engineering and intelligent manufacturing research to share scientific research results and cutting-edge technologies, understand academic development trends, broaden research ideas, strengthen academic research and discussion, and promote industrialization and cooperation of academic achievements. We sincerely welcome experts and scholars from universities and scientific research institutions at home and abroad, business people and other relevant personnel to participate in the conference and exchange.

2. Organizations

Organizer: 

East China Jiaotong University

Host：

School of Mechanical, Electrical and Vehicle Engineering, East China Jiaotong University

Key Laboratory of Vehicles and Equipment of Ministry of Education, East China Jiaotong University

Guangdong AIS Institute of Information Academic Exchange

Co-hosts:

East China Jiaotong University Intelligent Mechanical and Electrical Equipment Innovation Research Institute

Nanchang Key Laboratory of VR for Rail Vehicle System Training

Jiangxi Mechanical Engineering Discipline Alliance

3. Conference Chairmen：

Prof. Hesheng Liu, East China Jiaotong University

Prof. Minghui Hong, National University of Singapore

Prof. Yinquan Yu, East China Jiaotong University

4. Speakers:

Prof. Zexiang SHEN, Nanyang Technological University, Singapore

Zechang Shin graduated from King's College London, UK, with a PhD in Physics in 1989 and was awarded the King's College London Prize for Excellence in Doctoral Dissertation. He is currently Professor in the School of Mathematical Sciences, Professor in the School of Materials Science and Engineering, Director of the Center for Advanced Photonics Technology, and Associate Dean of the Graduate School of Nanyang Technological University, Singapore. He was the Founding Associate Dean of the School of Mathematical Sciences, Nanyang Technological University and Director of the Interdisciplinary Graduate School Program at Nanyang Technological University. He has been awarded the Singapore Newcomer Award for Outstanding Contribution, Global Highly Cited Scientist, Honorary Professor of Moscow State University, Adjunct Professor of the Russian Academy of Sciences and other internationally renowned institutions, Singapore Physics Society Gold Medal for Research Excellence, Nanyang Technological University Research Innovation Award, Expert Advisory Committee of the Overseas Chinese Affairs Office of the State Council of the People's Republic of China, and former President of the Singapore-China Association for the Promotion of Science and Technology Exchange. He was invited by the Nobel Prize Committee to nominate candidates for the Nobel Prize in Physics and was invited to nominate candidates for the Japan Prize; under his initiative, Nanyang Technological University established the Institute of Photonics, with Sir David Payne as its director, and the Center for Disruptive Photonic Technologies. He also started Nanyang Technological University's collaboration with Vietnam National University (Hanoi), initiated collaboration agreements with the Russian Academy of Sciences (RAS) and Moscow State University (MSU).

Prof. Yande Liu, East China Jiaotong University

Second-level professor, doctoral supervisor, currently the dean of the Intelligent Mechanical and Electrical Equipment Innovation Research Institute of East China Jiaotong University, leading talent of the third batch National "10,000 People Plan", the New Century Million Talents Project National Candidate, outstanding talent of the Ministry of Education, the head of the innovation team in the key areas of the Ministry of Science and Technology, the "most beautiful scientist" of the China Instrumentation Society, and the first of Jiangxi Province Po Yingcai 555 Project "Leading Talent", and outstanding graduate student instructor in Jiangxi Province. 

Prof. Liu mainly engages in mechatronics and hydraulic integration technology, intelligent nondestructive testing technology and equipment research; has presided over the national 863 Program, 12 national projects such as the Science and Technology Support Program and the National Self-Science Fund; 10 provincial and ministerial awards such as the first prize of provincial scientific and technological progress. Prof. Liu has published more than 100 PAPERS included in SCI and EI, authorized 21 invention patents, 15 software copyrights, and 10 achievements transformation item.

Prof. Yaguo Lei, Xi'an Jiaotong University

Prof. Yaguo Lei a professor at Xi'an Jiaotong University, a Fellow of the Institution of Engineering and Technology (IET), a Fellow of the International Society for Engineering Asset Management (ISEAM), a recipient of the National Outstanding Young Scientists Fund, a candidate of the National Special Support Program for High-Level Talents, and a highly cited scientist of Corevantage. He is an associate editor of IEEE Transactions on Industrial Electronics, Mechanical Systems and Signal Processing and other prestigious journals in this field. He has long been engaged in the research of mechanical system modeling and dynamic signal processing, big data intelligent fault diagnosis and life prediction, mechanical condition health monitoring and intelligent operation and maintenance. He has presided over more than 10 national projects such as National Key R&D Program and National Natural Science Foundation of China. He was awarded the Second Prize of National Technical Invention, China Youth Science and Technology Award, the First Prize of Natural Science of Ministry of Education, the First Prize of Natural Science of Shaanxi Province, and the Youth Science Award of Ministry of Education.

Prof. Tao Ye, Southern University of Science and Technology

Professor Ye of the Department of Electronic and Electrical Engineering of Southern University of Science and Technology is a doctoral supervisor, national distinguished expert (national key talent introduction project), adjunct professor of the Department of Electrical and Computer Engineering of Carnegie Mellon University. He graduated from the Department of Electronic Engineering of Tsinghua University in 1993 and received his Ph.D. from Stanford University in 2004. His main research directions are integrated circuits, EDA, brain-like neural circuits, artificial intelligence chips, Internet of Things communication chips and sensor devices. With more than 20 years of experience in the field of integrated circuit design and EDA, especially in the application specific integrated circuit (ASIC) and mix-signal IC (Mix-Signal IC), Prof Ye has a wealth of academic and industrial experience. He was the Technical Director of the Hong Kong Logistics and Supply Chain Management Technology R&D Centre (LSCM), one of the five government R&D centres in Hong Kong, and led a number of Hong Kong Government Innovation and Technology Fund projects as Project Leader and Principal Investigator. He has participated in the design of the world's first miniature low-power RFID tag chip and RFID reader chip, which combines RFID with mobile phone mobile platforms, so that RFID technology can eventually be extended to user terminals, and generate huge market opportunities in the fields of product anti-counterfeiting, authentication and payment. At the same time, Prof Ye also participated in the formulation and implementation of world standards and protocols for Internet of Things technology, and pioneered and developed a variety of key technologies for the Internet of Things. Prof Ye boasts deep experience in collaborating with business industries and the academic realm, having held engineering leaders and consulting positions at Synopsys Inc., Analog Devices Inc., Magma Design Automation Inc., Silicon Architects and various Silicon Valley companies, as well as adjunct professor at the Chinese Academy of Sciences, the University of Hong Kong, the Hong Kong University of Science and Technology, and the Chief Scientist of the Internet of Things Center of the Hong Kong University of Science and Technology.

A Prof. Wei Yao, National National University of Singapore, Singapore

Assistant Professor Yao holds a PhD from University of Cambridge, UK. Currently assistant professor, Department of Mechanical Engineering, National University of Singapore, PhD supervisor. Se has long been engaged in the preparation, forming and multifunctional characteristics of advanced structural and functional materials, and has made breakthroughs in the research on the integrated design and manufacture of functional materials-structures based on additive manufacturing in recent years. A Prof. Yao has presided over the Tier 1 Research Project of the Singapore Education Board, the Singapore Science and Technology Board Young Scholars Research Project, the National University of Singapore Basic Research Fund, and the Singapore Science and Technology Board and the United Kingdom Rolls-Royce Cooperation Project. With a good accumulation in the design and manufacture of additive manufacturing for mechanical, electromagnetic and acoustic metamaterials, Prof. Yao is also Editor-in-Chief of Material today Communications and Assistant Editor-in-Chief of Materials & Design. She has published more than 30 high-quality SCI search papers, google scholar H index 15, including engineering and comprehensive top journals Advanced Materials, Acta Materialia, Small, Applied Materials Today, ACS Applied Materials & interfaces, Applied Physics Letters, etc.

Prof, Yihui Zhang, Tsinghua University

Yihui Zhang is a long-appointed professor at Tsinghua University. He has long been engaged in the research of soft matter mechanics, 3D microstructure assembly, and mechanics of flexible electronic devices. He has published more than 150 academic papers with more than 11,000 citations; 6 Chinese invention patents and 3 US invention patents have been granted. As the corresponding author, the relevant results have been published in Nature, Science, Nature Materials, Nature Reviews Materials, Nature Electronics, NSR, Nature Communications, Science Advances PNAS, JMPS, IJSS and other high level journals. He has received the Scientific Discovery Award, MIT Technology Review "35 Innovators Under 35 Worldwide", National Merit Award, American Society of Mechanical Engineers (ASME) Thomas J.R. Hughes Young Scholar Award, International Society of Engineering Science Young Scholar Medal, ASME Sia Nemat- Nasser Early Career Award, Hong Kong Seeking Scholarship Award, and the Hong Kong Science and Technology Foundation. Nasser Early Career Award, Hong Kong Qiushi Distinguished Young Scholar Award, ASME Melville Medal, and Corevantage Highly Cited Scholar Award. He is an Associate Editor of Science Advances, Mechanics of Materials, Journal of Applied Mechanics, International Journal of Smart and Nano Materials, and Research. He is also a member of the Executive Committee of the International Association of Engineering Sciences, and the Vice Chairman of the Working Group on Mechanics of Electronic and Electromagnetic Devices and the Working Group on Mechanics of Soft Matter of the Chinese Society of Mechanics.

Assistant Researcher, Han Zhang, Institute of Acoustics, Chinese Academy of Sciences

With the overall transformation and upgrading of the international manufacturing industry, especially considering the increasing maturity of additive manufacturing (3D printing) technology and equipment, the theory and methods of metamaterial design have flourished. Acoustic wave/elastic wave metamaterials use microstructure as the basic unit to regulate the excitation, transmission and coupling of waves, artificially obtaining macroscopic characteristics that break through the limitations of natural laws, and realizing arbitrary regulation of wave propagation. The emergence of such "new materials" in basic disciplines and applied research has atrracted great attention. Metamaterial design and fabrication is an advanced multidisciplinary issue. This report mainly introduces the frontier development of metamaterial design and advanced manufacturing in intelligent manufacturing, and the usage of multi-objective optimization algorithm to solve the key problems. Through reverse operation, intelligent algorithms overcome the problems of limited prior knowledge, the multiphysics conditions that restrict each other, and overly complex preparation requirements in traditional methods, pushing forward the technological innovation and subversive innovation of metamaterial design and preparation for different applications, especially the promotion of rapid application of acoustic stealth, seismic protection, super-resolution imaging and detection, and intelligent structures in transportation equipment, structural health monitoring, wearable devices, bionics and medical treatment.

Zong Guisheng Chairman and CEO of Beijing Sandi Technology Co.

Executive Director of Powder Metallurgy Technology Innovation Strategic Alliance, Deputy Director of Expert Committee, Director of 3D Printing Professional Technical Committee, Deputy Director of Group Standard Committee, Deputy Director of Powder Metallurgy Committee of China Materials and Testing Group Standard Committee, Expert Member of National Additive Manufacturing Standardization Technical Committee, Expert Member of China Additive Manufacturing Industry Alliance, Anhui Spring Valley 3D Printing Intelligent Equipment Industry Technology Research Institute President, member of Shenzhen Association of Science and Technology, 2018 Chinese economic news figure. He was the managing director of a joint venture in China with the Stanley Group, a Fortune 500 company, and later promoted to president of the Eastern Hemisphere. He was the president of the U.S.-China Chamber of Commerce in Houston, Texas, U.S.A. He graduated from the University of Texas in 1991 with a Ph.D. in materials science and engineering, and was one of the first international Ph.D.s in additive manufacturing.

Prof. Xiaogang Liu,Wuhan University of Technology, China

Xiaogang Liu acquired his Ph.D. degree in mechanical engineering from the University of Queensland, Australia, and is an Associate Professor and Doctoral Supervisor in the School of Mechanical and Electronic Engineering at Wuhan University of Technology. He has chaired two scientific research projects supported by the National Natural Science Foundation of China, and his academic outputs include academic papers, invention patents and software copyrights in the fields of Contact Mechanics, Intelligent Manufacturing, Mechanical Vibration and Electromechanical Control etc. As the leader of a provincial teaching and research project about mechanical manufacturing, he summarised these academic outputs into monographs to integrate research and education, and was recognized as Fellow of Higher Education Academy (FHEA). Currently, he is an assessment expert of the national Natural Science Foundation of China, a senior member of the Chinese Mechanical Engineering Society, an expert of the high-tech industry in Wuhan, and was awarded the “T A Stewart-Dyer Prize/Frederick Harvey Trevithick Prize” by the Institution of Mechanical Engineers in London. 

Speech Title: Investigation of Squeal Noise based on Mode Coupling and Negative Damping Theory

Hongtao Tang Professor, Wuhan University of Technology

Hongtao Tang Associate Professor/doctoral supervisor of Wuhan University of Technology, deputy director of the Department of Industrial Engineering. In recent years, he is mainly engaged in digital design, intelligent manufacturing, intelligent optimization and application in manufacturing industry (automotive, hydraulic cylinder, mold, casting and other industries); developed digital design software applicable to automotive, hydraulic cylinder, mold, casting and other industries, developed intelligent manufacturing PLM/ERP/MES industrial software, which has been applied in many companies in different industries and achieved great economic benefits. Received one second prize of Hubei Provincial Science and Technology Progress (ranked 2/10). He has presided over 2 national natural science funds and 2 youth funds, and more than 20 horizontal projects with a total funding of more than 8 million. He has published more than 60 academic papers, including more than 20 SCI papers, one English monograph, 19 soft books, and 13 invention patents. He is a reviewer of more than 30 international journals such as IEEE, IJPR, JCLP, CAIE, JIM, ASOC, COR, etc. He has been awarded excellent paper award 4 times and Kenote speaker report 5 times. He is a reviewer of industrial intelligent transformation, industrial internet and digital economy for Wuhan Municipal Bureau of Economic and Information Technology.

5. Publication:

All submissions will be peer reviewed, and the accepted papers will be published and submitted to  EI Compendex (Web of Science) for indexing. 

*All submissions must not be less than 4 pages in length.

6. Call for papers:

The topics of interest for submission include, but are not limited to:

Topic 1: Mechanical engineering

1). Mechanical dynamics and vibration

2). Mechanical strength

3). Mechanical transmission applications

4). Mechanical design

5). Rolling

6). Foundry technology and equipment

7). Welding technology and equipment

8). Plastics processing technology and equipment

9). Heat treatment technology and equipment

10). Cutting technology and equipment

11). Special processing technology and equipment

12). Machine assembly process

13). Non-metallic processing

14). CNC technology and CNC machine tools

15). Fluid power transmission and control

16). Instrumentation

17). Vehicle dynamic performance simulation

18). Energy machinery and equipment

19). Chemical machinery and equipment

20). Textile machinery and equipment

21). Food machinery

22). Agricultural machinery manufacturing

23). Mining Machinery Engineering

24). Metallurgical machinery and its automation

25). Construction machinery and equipment

26). Aircraft structure and design

27). Spacecraft structure and design

28). Aircraft manufacturing technology

29). Intelligent electromechanical and robotics

30). Precision manufacturing and measurement

Topic 2: Intelligent manufacturing

1). Intelligent control system

2). New sensing technology

3). Dynamic mechanical analysis, optimization and control

4). Industrial robots and automated production

5). Green manufacturing

And other related topics...

_{Manuscripts reviewed by experts from the conference organizing committee will be accepted and published on conference proceedings. The published papers will then be submitted for EI, SCOPOUS, abstracting/indexing. Authors are assured of quick and accurate indexing.}

7. Submission Methods:

1.The submitted papers must not be under consideration elsewhere.

2.Please send the full paper(word+pdf) to SUBMISSION SYSTEM

3.Please submit the full paper, if presentation and publication are both needed.

4.Please submit the abstract only, if you just want to make presentations.

5.Should you have any questions, or you need any materials in English, please contact us at contact@meim.com

_Note: 

_{1) Both Abstract and Full Paper are welcomed. The author can make an oral presentation after the Abstract is accepted and the payment is finished.}

_{2) All submitted articles should report original, previously unpublished research results, experimental or theoretical. Articles submitted to the conference should meet these criteria and must not be under consideration for publication elsewhere. We firmly believe that ethical conduct is the most essential virtual of any academic. Hence any act of plagiarism is a totally unacceptable academic misconduct and cannot be tolerated.}

8. Registration:

_{Details of the registration fees}

_{1. Registration fees for MEIM 2022 Regular is 500 USD / 3200 CNY per paper.}

_{2. If the length of the paper exceeds 4 Pages, the cost of Each Extra Page (begin at Page 5) is 50 USD / 300 CNY.}

_{3. Registration fees include conference proceedings, lunches, gifts and attending all technical sessions.}

_{4. The registration fee does not include:}  

   _{• Accommodation}

   _{• Visa application fee}

   _{• Transportation fee}

_{5. At least one author for each accepted final paper must pre-register.} 

_{6. Completed registrations will be acknowledged by the Organizing Committee within 2-5 workdays after receiving your payment.}

_{7. If you cannot attend the conference due to some reasons, we will mail the proceedings and invoice to you.} 

_{8. At least 20% of registration fee will be charged as the service fee if you retract your paper for personal reasons.}

9. Schedule：

_{* The outline program is shown on this page. A more detailed programme will be emailed to you after registration deadline. Actual time arrangement may be a little different according to participant numbers.}

_{Oral Presentation Instruction}

_{1. Timing: a maximum of 15 minutes total, including speaking time and discussion. Please be considerable once the Program is completed the next speaker should also be allocated with reasonable amount of time.}

_{2. You can use CD or USB flash drive (memory stick), make sure you scanned viruses in your own computer. Each speaker is required to meet her/his session chair in the corresponding session rooms 10 minutes before the session starts and copy the slide file(PPT or PDF) to the computer.} 

_{3. It is suggested that you email a copy of your presentation to your personal inbox as a backup. If for some reason the files can’t be accessed from your flash drive, you will be able to download them to the computer from your email.} 

_{4. Please note that each session room will be equipped with a LCD projector, screen, point device, microphone, and a laptop with general presentation software such as Microsoft PowerPoint and Adobe Reader. Please make sure that your files are compatible and readable with our operation system by using commonly used fronts and symbols. If you plan to use your own computer, please try the connection and make sure it works before your presentation.} 

_{5. Movies: If your files contain movies please make sure that they are well formatted and connected to the main files.}

_{Poster Presentation Instruction}

_{1. Maximum poster size is 59.4 CM wide by 84.1 CM high（A1）.} 

_{2. Posters are required to be condensed and attractive. Information should be visible in certain distance-1 meter apart.}

_{3. Please note that during your poster session, the author should stay by your poster to explain and discuss your paper with visiting delegates.}

10. Contact Us:

Conference Secretary: Ms. lv

Tel: +86-13798148224 (cellphone)

WeChat: 13798148224

QQ: 3326203643