2024 3rd International Symposium on Control Engineering and Robotics（ISCER 2024）

Website：www.iscer.net

Time and Place: May 24-26, 2024, Changsha, Hunan, China

Round 1 deadline: January 12, 2024

Notification of acceptance: within 1 week of submission

EI stable search, EI search about a month after publication

About ISCER 2024

The 2024 3rd International Symposium on Control Engineering and Robotics（ISCER 2024）will be held from May 24 to 26, 2024 in Changsha, China.The progress of control engineering plays an irreplaceable role in the development of modern industry. It can not only effectively control the cost, but also enhance the safety of the project and the accuracy of detection. Robots have a wide range of applications in practically every industry imaginable. Undoubtedly, there are strong relations between Control Engineering and Robotics. Therefore the ISCER 2024 conference mainly focused on control engineering, robotics, AI and related fields. The purpose of the conference is to provide a platform for experts, scholars, engineering technicians, and technical R&D personnel engaged in the research of control engineering, robotics, AI to share scientific research results and cutting-edge technologies, understand academic development trends, broaden research ideas, strengthen academic research and discussion, and promote cooperation in the industrialization of academic achievements. We sincerely invite experts and scholars from domestic and foreign universities and research institutions, businesses, and other related personnel to attend the conference!

Organizer

Co-Organizer

Committee

Conference General Chairs

	Prof. Kun Li, Chongqing University Specialist of "Hongshen Young Scholars", Doctoral Supervisor, Overseas Talents, School of Mechanical Engineering, Chongqing University（click）
	Prof. Guoqing Wang, University of Electronic Science and Technology Reviewer of IEEE TIFS, IEEE TMM and IEEE TCSVT, and guest editor of international journals such as CVPR, ICCV, CVPR, ICCV, ECCV, ACM MM, AAAI, IJCAI, etc.（click）

Conference Co-Chair

Prof. Teng Li, Shandong University Executive Director of Shandong University-Fengshuo Intelligent Technology Research Center, Director of Shandong University-Shandong Byte Information Intelligent Technology Laboratory（click）

Technical Program Committee Chair

Publication Chair

Experts of the Organizing Committee

Prof. Guodong Yu, Professor, State Key Laboratory of Robotics and Systems, Harbin Institute of Technology, Member of IEEE（click）

Prof. Fan Liu, Hohai University, Associate Dean, School of Computer and Information Science, Department of Informatics（click）

Assoc. Prof. Tianyu Li , Jilin University, Deputy Secretary General, China Construction Machinery Association, Shoveling and Transportation Machinery Branch（click）

Assoc. Prof. Yujie Li, Guilin University of Electronic Science and Technology, has long been working on research related to sparse representation, compressed perception, deep learning, and computer vision（click）

Keynote Speaker

Prof. Kun Li, Chongqing University Research interests: mainly engaged in additive manufacturing, intelligent 3D net forming, high-performance materials and phase transition, materials computational science and other research. Biography: Distinguished Professor of "Hongshen Young Scholars", Ph.D. supervisor, overseas talents. Obtained Bachelor's degree from Jilin University, obtained a Philosophy degree from Tsinghua University. In February 2017, he went to the University of Texas at El Paso for postdoctoral research and served as Prof. Lawrence E. Murr (The pioneer in additive manufacturing in the US) and R.D.K. Misra's Ph.D. student co-supervisor. The scientific research achievements won the University of Texas Researcher Award 2018. In April 2019, he served as a senior researcher in the Department of Mechanical Engineering and Materials Science, University of Pittsburgh. In August 2020, he was hired as a "Hongshen Young Scholar" Distinguished professor and doctoral supervisor of Chongqing University, engaged in teaching and research work. Mainly engaged on additive manufacturing, intelligent 3D net forming, high-performance materials and phase change, and material computing. He has published more than 40 papers in famous journals and conferences such as "Additive Manufacturing", "Journal of Materials Science and Technology", "Materials Science and Engineering: A", and "Journal of Nuclear Materials". Served as the reviewer of famous journals in the fields of "Acta Materialia", "Materials Research Letters", "International Journal of Plasticity" and other fields.

Prof. Teng Li, Shandong University Research interests: Long-term research work in the direction of robotics and intelligent unmanned systems, focusing on the use of deep learning methods and artificial intelligence techniques to solve the problem of time series prediction and numerical analysis of spatial fields, and the theoretical research is widely applied to the field of intelligent unmanned monitoring of structures and environments. Biography: Teng Li, Professor of School of Control Science and Engineering at Shandong University,  graduated from the University of British Columbia. He dedicates his research on robotics and intelligent  unmanned systems, focusing on the theories of time series forecasting and spatial field analysis using  deep learning and artificial intelligence, and further implementing on the applications of structural and  environmental monitoring. He has published over 30 papers including IEEE Transactions on Systems,  Man, and Cybernetics: System and other leading journals and conferences. He is the executive director  of the SDU-Fengshuo Intelligent Technology Center, the Program Co-Chair of ISBIR 2022, the  Publication Chair of IEEE ICCSE 2021, the Session Co-Chair of IEEE/RSJ IROS 2017, the Technical  Program Committee member of HP3C 2023 and CSCWD 2022, the Local Arrangement Committee  member of IEEE CASE 2019. He is also the Reviewer Committee member of Electronics and  Mechatronic Systems and Control. He serves as the Committee member of the National Contest of  Robotics and Artificial Intelligence (Shandong Province). He has participated in many international and  national academic conferences and has been invited to give presentations at the University of Toronto,  Chinese University of Hong Kong, and other research institutes.

Publication

All papers, both invited and contributed, will be reviewed by two or three experts from the committees. After a careful reviewing process, all accepted papers of ISCER 2024 will be published by Conference Proceedings , and then will be submitted to EI Compendex and Scopus for indexing. 

Proceedings of previous conferences have been successfully published and searched! (Details are as follows and can be viewed by clicking on them)

ISCER 2022        IEEE Xplore	ISCER 2022        EI Compendex
ISCER 2022        Scopus	ISCER 2023        IEEE Xplore
ISCER 2023        EI Compendex	ISCER 2023        Scopus

Call For Paper

2024 3rd International Symposium on Control Engineering and Robotics（ISCER 2024） will provide a premier interdisciplinary platform for researchers, practitioners, and educators to present and discuss the most recent innovations, trends, and concerns as well as practical challenges encountered and solutions adopted in the fields of Control Engineering and Robotics.

Topics of interest for submission include, but are not limited to:

1.     Control science and engineering

2.     Automatic detection technology

3.     Process control

4.     Industrial control technology

5.     Pattern recognition and intelligent systems

6.     Computer control systems

7.     Robotics and mechanics

8.     Mechanical engineering

9.     Mechanism and machine design

10.   Mechanical design and manufacturing and its automation

11.   Gears and mechanical transmissions

12.   Medical robotics and prosthetics

13.   Educational robotics

14.   Mechatronics engineering

15.   Automated vehicles

16.   Artificial intelligence technology and applications

...

Call For PaperInstructions for Submission and Attendance 

(for submission and attendance, please fill in the invitation code W8155)

1.Types of Conference Participation

(1) Full paper submission (2) Oral presentation 

(3) Poster Presentation (4) Audience Participation

2. To register for an oral presentation, please register through the conference registration system and submit the paper title and abstract for review; abstracts submitted for oral presentations will not be submitted for publication.

3. For poster presentations, please follow the template to create a poster, and then register through the conference registration system, and submit the poster when registering.

4. Notes for full paper submission:

(1) This conference does not accept review papers, which must be in English and have not been published in academic journals and conferences at home and abroad.

(2) Papers must be laid out according to the template and must not be less than 4 pages.

(3) The repetition rate of the whole paper should not be more than 30% (including author information and references), and authors can check the repetition rate by Turnitin or other query systems at their own expense, or the authors will be responsible for the rejection caused by the repetition rate of the paper.

(4) The accepted papers will be published in the conference proceedings, and submitted to EI Compendex and Scopus search after publication, EI stable search, and the previous sessions have been published and searched.

(5) If you want to attend the conference after your paper has been accepted, please be sure to submit an online registration for the conference, and each paper will have one free place to attend the conference (audience, poster presentations and oral presentations).

Download the paper template: the corresponding paper template can be downloaded from the conference homepage under the conference materials section, and other conference materials can also be downloaded from the conference materials section.

Submission：https://www.aischolar.org/attendees/paperSubmit/EBABFMM

Resignation：https://www.aischolar.org/attendees/toSignUp/EBABFMM

Registration Fee

Contact

Website：www.iscer.net

Email：iscer_contact@163.com

QQ：3465006475

Tel（Miss W）：19872446270（WeChat）